NOTE: FOR PROFESSIONAL USE ONLY! USE ONLY WITH A ROTARY POLISHER!
Panel Shop 1200
For best results use with a new foam cutting or finishing pad on a rotary polisher techniques and tips unlocking the ultimate finish warning – product user needs to assess the paint condition before proceeding. There will be autos that might not require an aggressive “first” pad 1) for most colors use a white “aggressive/hard” pad first and then follow it with a black pad for ultimate gloss. This two pad technique is for almost all colors, except black & red pads to be used are white and black 2) for black/red colors follow the 2 pad technique above along with a blue pad after the black pad. A blue pad is a very fine foam and will leave a flawless finish on especially black & red colors pads to be used are white, black and blue 3) cautionary advice: if not careful you may burn the paint. Foam pads create so much heat that it is okay to use a wool or synthetic wool pad instead of the white foam pad as a first step. Note: results will vary. Not everyone is a professional with buffers/polishers and pads note: when switching over to panel shop a new pad must be used and can be reused with panel shop only. Available in 12oz. and 32oz.
